How To Make The Best Spudgun

How To Make The Best Spudgun

What you will need:

• 1 BBQ igniter (button with small cables)
• 1 PVC or ABS pipe 18" long X 4" diameter.
• 1 PVC or ABS pipe 5 ft long X 1,5" diameter.
• 1 PVC or ABS screwable cap for the 4" pipe.
• 1 PVC or ABS 4"-1,5" adapter.
• PVC or ABS glue
• If you use PVC, clean all pieces before glue it -- use PVC cleaner.

Assembly:

1. Glue the 4" diameter pipe into the female plug of the 4"-1,5" adapter.
2. Glue the 1,5" diameter pipe into the other plug of the adapter.
3. Glue the 4" end cap onto the other end of the 4" pipe.
4. Finally, place the BBQ igniter onto the 4" pipe; make it so it can spark when you press the button.