Shake and Bake method

Discussions of any and all sorts of mind-warping chemicals, pills, booze, mind machines, trippy stuff, current street prices, importing pharmaceuticals, smart drugs, nutrients, herbs, and altered states. Please try to keep your conversations "theoretical" in nature, since this is an open conference.
User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Shake and Bake method

Post by Enigma » Sun Dec 03, 2017 7:48 pm

How to make Methamphetamine

How to Make Cryztal Dope in 2-3 Hours Using a 2 Liter Bottle
by Lord Mighty
--------------------------------------------------------------------------------

Disclaimer: Neither I nor the host of this page take any
responsibility for your actions after reading this text. This material
is for educational purposes only. It is to inform the general public
of the materials and methods used by clandestine chemists to
manufacture this highly illegal substance. By scrolling beyond this
point, you agree not to try any of this and not to bring any criminal
charges to the creators of this file.

Note: This is a very easy 12-Step program. :-)


Introduction:
--------------------------------------------------------------------------------
This recipe makes REAL Crystal Methamphetamine, unlike most recipes
out there that only make crank. This is not hypo either, it's kick ass
ammonia dope. My way was developed to be quick and to not give off as
much smell as other methods. It doesn't require going out and stealing
anhydrous ammonia from farms either. I still only recommend doing it
if you have had previous experience making dope. Clean up is easy too.
All you have to do is wash out the bottles you used and throw
everything away.


Materials:
--------------------------------------------------------------------------------
1 2 Liter Bottle (with cap)
1 1 Liter Bottle (get 2 caps for it)
1 20 oz. Bottle (with cap)
1 Quart Jar
2 ft. 1/4in. diameter rubber/plastic hose (aquarium hose works good)
Coffee Filters
1 Funnel
1 Tubing Cutter (go to Home Depot)
2 Plyers
1 Roll of Ductape or Electrical Tape 1 Blender or Food Processor

200 60mg Pseudophedrine HCL pills (Actifed, Sudafed, Suphedrine, etc.)
1 1/2 cups Ammonium Nitrate fertilizer (33-0-0)
3 cans starting fluid
3 AA Energizer Lithuim Batteries
1 bottle Red Devil brand Lye
2 caps of water (use the top off the 2 liter)
1 box Iodized Salt
1 bottle Liquid Fire brand drain opener


Procedure:
--------------------------------------------------------------------------------
1) Rinse and dry out all of your bottles. Be sure to get ALL of the
moisture out. Don't go any further until they are completely dry.
2) Put your pills into the blender or food processor and grind them
into powder. Mix them in with the 1 1/2 cups of Ammoniun Nitrate
fertilizer. Use the funnel to pour the mixture into the 2 liter
bottle.
3) Hold your cans of starting fluid upside-down and hold the button
until all of the air is out. Once the air is out, use a screwdriver (I
use a bottle opener.) to poke a hole in the bottom of the cans. Using
the funnel again, pour the liquid (ethyl ether) out of the cans into
the 2 Liter with the Ammonium Nitrate/pills mixture.
4) Now you have to take the Lithium strips out of the batteries (This
is why I recommend being experienced.). Tighten the tubing cutter onto
the center of the battery and spin it around until the metal casing is
cut. Be careful not to cut into the guts of the battery. If you mess
up the battery may become extremely hot and catch fire. Next take your
2 plyers and grab each end of the battery. Pull each side of the
casing off. Once the insides are out of the casing, place them in an
air tight container (Tupperware, Rubbermaid, etc.). They can be stored
for up to 3 hours. The lithium will become very volatile if exposed to
moisture in the air or water. Be careful!
5) Unroll the guts of the first battery and remove the Lithium strip.
There are two strips in a Lithium battery, so be sure not to get the
wrong one. You do not want the one that has shiny metal around the
edges. Tear the Lithium strip into tiny pieces and place them in the 2
Liter. Do the same with the other two batteries.
6) Take the cap off your bottle of Lye and fill its cap with it. Pour
this into the 2 Liter as well. Use the funnel!
7) Take the top of the 2 Liter and fill it with water. Pour the water
into the 2 Liter. Repeat once. You should see little bubble floating
to the top of the liquid in the bottle. Place the cap on the bottle
and swish it around a little (do not shake!).
8) Now your dope is cooking (I call it "rolling"). About every 5
minutes loosen the cap a little to release the pressure and to make it
"roll" a little harder. After about 10 seconds re-tighten the cap.
Don't breathe too deeply, because gaseous ammonia is released.
9) You have to keep adding Lye or your dope will stop "rolling". About
every 20 minutes add about 1 cap (use the cap off the lye bottle!) of
Lye. Tighten the top tight on the 2 Liter and shake the bottle
vigorously for about 8 seconds. Loosen the top, releasing the
pressure, and the dope will start "rolling" perfectly. Repeat every 20
minutes. You do not want to use more than 2/3 bottle of Lye, so you
may have to adjust the amount you add or how often you add it to make
it go for 2 hours.
10) After 2 hours, your dope is through "rolling". Get the funnel and
place it in the 1 Liter bottle. Put two coffee filters in the funnel
and pour the liquid from the 2 Liter through them into the 1 liter
bottle. Pour a little at a time to make sure you don't let any get
outside the filters. Once the 1 liter is filled, tighten the top on it
all the way. It'll ruin your dope if you let dirt or moisture get into
it.
11) Take the 2nd top to the 1 liter and the top to the 20 oz. and cut
holes in them barely big enough to fit the plastic/rubber hose into.
Put each end of the hose into each top and make them air tight using
ductape or electrical tape. Make sure you use a clean hose!
12) Remove the cap from the 1 liter bottle and screw on the one with
the hose attached to it. Pour iodized salt into your 20 oz. until it
is filled about 1/2 inch from the bottom. Take the cap from your 2
liter or another cap the same size and fill it with Liquid Fire. Pour
the Liquid Fire onto the salt and tightly screw the top attached to
the other end of the hose onto the 20 oz. Shake the 20 oz.
left-to-right for about 4 seconds. Pump (squeeze and release) it once
and sit it down. Smoke will begin the fill the 1 liter. As the smoke
begins to go into the liquid, you will see the dope "fall". It looks
snow. When the smoke stops, take the top off the 1 liter and tie a
knot in the hose. Put the other top back on the 1 liter and shake it
vigorously for 30 seconds. Let the crystal settle. Put the funnel over
the jar with 2 new coffee filters it it and pour the liquid through
them. A little bit of meth gets caught in the filters, but the rest
stays in the bottle. Cut the top half of the bottle off and use a hair
dryer to dry the crystal. Snort it or smoke it and get high as a bat.
:weed: [IP: logged]

chef_has_mercy
Posts: 1
Joined: Mon Nov 09, 2020 3:14 am

Re: Shake and Bake method

Post by chef_has_mercy » Mon Nov 09, 2020 3:34 am

You mentioned lithium strips. Would using lithium salts thats in lithium medication for bi-polar disorder work?
When you mentioned "Pump (squeeze and release) it once
and sit it down." This is just squeezing a plastic bottle once. (One time)?
Great write up ive been reading stories on this topic for years and this is a very easy well explained strategy.
Thank you

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Mon Nov 09, 2020 6:44 am

I didn't write this article, but to my understanding lithium the medication and lithium the element are different things.


Yes, you're just letting shit out of the bottle. Basically burping it.
:weed: [IP: logged]

FerdaFunbags17
Posts: 1
Joined: Sat Nov 28, 2020 7:09 pm

Re: Shake and Bake method

Post by FerdaFunbags17 » Sat Nov 28, 2020 7:12 pm

How much product should this produce if you use this method with the exact amount of ingredients explained in the post? Are we talking a lbs. , Oz's, or grams?

Thank you for the post! Great instructions.

User avatar
fuckreddit
Registered
Posts: 361
Joined: Wed Nov 11, 2020 2:13 pm

Re: Shake and Bake method

Post by fuckreddit » Sat Nov 28, 2020 8:42 pm

jesus christ i came here to write shitty poems not this
Ту лоцуи ин црима - орас!

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Sun Nov 29, 2020 8:28 am

FerdaFunbags17 wrote:
Sat Nov 28, 2020 7:12 pm
How much product should this produce if you use this method with the exact amount of ingredients explained in the post? Are we talking a lbs. , Oz's, or grams?

Thank you for the post! Great instructions.
It's usually pretty safe to assume you'll see a gram per box of pseudo.
:weed: [IP: logged]

shahirsao
Posts: 2
Joined: Mon Feb 22, 2021 8:05 am

Re: Shake and Bake method

Post by shahirsao » Mon Feb 22, 2021 8:07 am

Just how much is 1 box of iodised salt? I don't think that's an SI unit.

shahirsao
Posts: 2
Joined: Mon Feb 22, 2021 8:05 am

Re: Shake and Bake method

Post by shahirsao » Mon Feb 22, 2021 9:19 am

So what's the mass of 1.5 cups of ammonium nitrate fertilizer? I can't get any of the fertilizer so I'd have to use the pure salt.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Mon Feb 22, 2021 4:47 pm

Like the volume of the salt? Off hand I wanna say like a pound of salt.
:weed: [IP: logged]

Porygon
Posts: 3
Joined: Sat Apr 03, 2021 1:55 pm

Re: Shake and Bake method

Post by Porygon » Sat Apr 03, 2021 1:59 pm

I would assume Amonium Sulfate would work as well? Probably just more, from what I have heard.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Sun Apr 04, 2021 7:05 am

I've heard it does.
:weed: [IP: logged]

MR LONELY
Posts: 1
Joined: Sat May 01, 2021 2:35 am

Re: Shake and Bake method

Post by MR LONELY » Sat May 01, 2021 2:43 am

Is this safe though?

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Sat May 01, 2021 7:19 am

It's how a pretty good amount of methamphetamine is made these days.
:weed: [IP: logged]

Das Troll
Registered
Posts: 1691
Joined: Mon Apr 15, 2019 2:10 am

Re: Shake and Bake method

Post by Das Troll » Sun May 02, 2021 7:20 pm

MR LONELY wrote:
Sat May 01, 2021 2:43 am
Is this safe though?
Is meth safe :D

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Mon May 03, 2021 5:17 am

Das Troll wrote:
Sun May 02, 2021 7:20 pm
MR LONELY wrote:
Sat May 01, 2021 2:43 am
Is this safe though?
Is meth safe :D
An argument could be made for it, that's for sure.
:weed: [IP: logged]

K.mallah
Posts: 3
Joined: Fri May 14, 2021 6:39 am

Re: Shake and Bake method

Post by K.mallah » Fri May 14, 2021 6:46 am

Easy way and i will try but There are some questions.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Fri May 14, 2021 2:23 pm

Bro, I'm not gonna lie, I didn't write the article and can only answer basic questions.

You're more than welcome to share your experience so future generations can cook meth though.
:weed: [IP: logged]

K.mallah
Posts: 3
Joined: Fri May 14, 2021 6:39 am

Re: Shake and Bake method

Post by K.mallah » Fri May 14, 2021 9:18 pm

Helladamnleet wrote:
Fri May 14, 2021 2:23 pm
Bro, I'm not gonna lie, I didn't write the article and can only answer basic questions.

You're more than welcome to share your experience so future generations can cook meth though.
..
Have you tried..?? Thats enough

K.mallah
Posts: 3
Joined: Fri May 14, 2021 6:39 am

Re: Shake and Bake method

Post by K.mallah » Fri May 14, 2021 9:20 pm

Helladamnleet wrote:
Fri May 14, 2021 2:23 pm
Bro, I'm not gonna lie, I didn't write the article and can only answer basic questions.

You're more than welcome to share your experience so future generations can cook meth though.
This is a great honor for me. I will not forget this historic moment.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Sun May 16, 2021 6:38 am

K.mallah wrote:
Fri May 14, 2021 9:18 pm
Helladamnleet wrote:
Fri May 14, 2021 2:23 pm
Bro, I'm not gonna lie, I didn't write the article and can only answer basic questions.

You're more than welcome to share your experience so future generations can cook meth though.
..
Have you tried..?? Thats enough
Oh, yeah. Been a while, but as I recall it's not terrible. I know I wish people around here still did it because its usually consistently good product, you just gotta be on top of burping it so you don't explode.
:weed: [IP: logged]

Dean4545
Posts: 2
Joined: Sun Jun 06, 2021 11:06 pm

Re: Shake and Bake method

Post by Dean4545 » Sun Jun 06, 2021 11:20 pm

Do not follow this bullshit or if u do your gonna end up in the burn unit or jail if not dead. Never never add water to bottle after you have put you lithium in . If you set on adding water even though you don't need it ,then add it before as it will sink under the fuel and lithium wiil float on top. If you use starting fluid u have to do a water wash 1st or it will fuck up your dope. And forget about pop bottles use a steel fire extinguisher much safer and way better dope

Das Troll
Registered
Posts: 1691
Joined: Mon Apr 15, 2019 2:10 am

Re: Shake and Bake method

Post by Das Troll » Mon Jun 07, 2021 12:40 am

Dean4545 wrote:
Sun Jun 06, 2021 11:20 pm
Do not follow this bullshit or if u do your gonna end up in the burn unit or jail if not dead. Never never add water to bottle after you have put you lithium in . If you set on adding water even though you don't need it ,then add it before as it will sink under the fuel and lithium wiil float on top. If you use starting fluid u have to do a water wash 1st or it will fuck up your dope. And forget about pop bottles use a steel fire extinguisher much safer and way better dope
See, safety first. Good post.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Mon Jun 07, 2021 5:22 am

Dean4545 wrote:
Sun Jun 06, 2021 11:20 pm
Do not follow this bullshit or if u do your gonna end up in the burn unit or jail if not dead. Never never add water to bottle after you have put you lithium in . If you set on adding water even though you don't need it ,then add it before as it will sink under the fuel and lithium wiil float on top. If you use starting fluid u have to do a water wash 1st or it will fuck up your dope. And forget about pop bottles use a steel fire extinguisher much safer and way better dope
Finally, someone who knows what they're talking about (presumably) chimed in.

Can you go into a little more detail as to why you can add water, but only at a certain stage, but really don't have to at all?
:weed: [IP: logged]

Dean4545
Posts: 2
Joined: Sun Jun 06, 2021 11:06 pm

Re: Shake and Bake method

Post by Dean4545 » Tue Jun 08, 2021 11:13 pm

Well 1st off water is heavier then fuel so it will be under the cold pack and lye. Notice I didn't say pills in that sentence. That's because u don't add then till your lithium has bronzed . But if u add water before the lithium it's way safer then dumping water on top of lithium that is floating on top of a bunch of flammable liquid. This shit isn't rocket science people it's making dope a little common sense will get you far in life. Keep you of burn unit and jail. It's dumbasses like whoever wrote this tec that has made it so difficult to get pills .you can only burn down so many trailers attempting to make dope before the public demands changes.

Das Troll
Registered
Posts: 1691
Joined: Mon Apr 15, 2019 2:10 am

Re: Shake and Bake method

Post by Das Troll » Wed Jun 09, 2021 2:31 am

I have zero chemistry knowledge to my shame. I didn't know any of this. Is this the only bad spot in the recipe Dean or is there more you would change?

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Wed Jun 09, 2021 5:35 am

Dean4545 wrote:
Tue Jun 08, 2021 11:13 pm
Well 1st off water is heavier then fuel so it will be under the cold pack and lye. Notice I didn't say pills in that sentence. That's because u don't add then till your lithium has bronzed . But if u add water before the lithium it's way safer then dumping water on top of lithium that is floating on top of a bunch of flammable liquid. This shit isn't rocket sciencee people it's making dope a little common sense will get you far in life. Keep you of burn unit and jail. It's dumbasses like whoever wrote this tec that has made it so difficult to get pills .you can only burn down so many trailers attempting to make dope before the public demands changes.
Correct, it's chemistry. A different form of science.

I appreciate all the information. I've wondered for 15 years how legit any of the recipes in the archives really are. Now maybe idiots can stop messaging me asking if lithium grows on trees.
:weed: [IP: logged]

Aducee
Posts: 1
Joined: Sat Jun 26, 2021 10:18 pm

Re: Shake and Bake method

Post by Aducee » Sat Jun 26, 2021 10:25 pm

Is it possible to buy the lithium strips??

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Sun Jun 27, 2021 6:52 am

No. Just buy a lithium battery.
:weed: [IP: logged]

Jagamoney
Posts: 1
Joined: Wed Jul 28, 2021 3:23 pm

Re: Shake and Bake method

Post by Jagamoney » Wed Jul 28, 2021 3:27 pm

Can someone send me the tutorial in video of shake and bake merth

Das Troll
Registered
Posts: 1691
Joined: Mon Apr 15, 2019 2:10 am

Re: Shake and Bake method

Post by Das Troll » Wed Jul 28, 2021 11:44 pm

Jagamoney wrote:
Wed Jul 28, 2021 3:27 pm
Can someone send me the tutorial in video of shake and bake merth
Good luck trying to find a video of someone committing a crime by cooking meth. There's literally a guide at the beginning of this post, just go off that.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Thu Jul 29, 2021 6:38 am

Jagamoney wrote:
Wed Jul 28, 2021 3:27 pm
Can someone send me the tutorial in video of shake and bake merth
No.
:weed: [IP: logged]

AjayAus
Posts: 40
Joined: Tue Sep 07, 2021 2:18 am
Location: Never you mind where I am!

Re: Shake and Bake method

Post by AjayAus » Tue Sep 07, 2021 3:54 am

You should ALWAYS use a SODASTREAM bottle (500ml) or (1ltr)
NEVER a soda pop bottle!!!!!
A SODASTREAM BTL HOLDS 240psi & more pressure (after PSE is in) ALWAYS means better meth!! :shakem:

Mshoon
Posts: 5
Joined: Mon Nov 01, 2021 1:53 am

Re: Shake and Bake method

Post by Mshoon » Mon Nov 01, 2021 2:04 am

The only pills I seem to be able to get in Aust is clarantyne 12d which have psues amongst other rubbish. Can I freebase these to pure pseu? My ex used to be a chef n used glassware. I seem to remember him getting the pseu out of the binders using a 1.25ltr bottle, water, caustic soda and xylene but I can't remember amounts or process other than drying on a glass dis n ending up with pure pseu before starting his baking. Any ideas? Or info please! I've wasted $3k in 3weeks trying to buy and ended up with cutters or research chemicals that make you feel loved ke shit. It's not right people getting away with giving people rubbish instead of what u pay for and expect. It's actually dangerous.

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Mon Nov 01, 2021 5:27 am

Should work fine considering the whole idea is to get the extra shit out of the pseudo.
:weed: [IP: logged]

Mshoon
Posts: 5
Joined: Mon Nov 01, 2021 1:53 am

Re: Shake and Bake method

Post by Mshoon » Mon Nov 01, 2021 6:02 pm

Enigma wrote:
Mon Nov 01, 2021 5:27 am
Should work fine considering the whole idea is to get the extra shit out of the pseudo.
True. Thanks for that

Mshoon
Posts: 5
Joined: Mon Nov 01, 2021 1:53 am

Re: Shake and Bake method

Post by Mshoon » Mon Nov 01, 2021 6:02 pm

Enigma wrote:
Mon Nov 01, 2021 5:27 am
Should work fine considering the whole idea is to get the extra shit out of the pseudo.
True. Thanks for that

Mshoon
Posts: 5
Joined: Mon Nov 01, 2021 1:53 am

Re: Shake and Bake method

Post by Mshoon » Mon Nov 01, 2021 10:09 pm

Does anyone know if I could use Aspen dexamfetamine pills?

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Tue Nov 02, 2021 5:38 am

In theory yes, but the extraction process may be different. From what I can tell though it would be easier to get the dexamfetamine out of the pill than it would be to make methamphetamine out of pseudo.
:weed: [IP: logged]

ThaProphet
Posts: 6
Joined: Thu Nov 04, 2021 3:17 pm
Location: Portugal

Re: Shake and Bake method

Post by ThaProphet » Thu Nov 04, 2021 3:20 pm

Hey. I'm new here. Found this forum when I was looking for recipes. Since I moved back to my home country (Portugal) I can't find anyone selling ice. I wanted to make my own, however as said above, it's extremely hard to find any meds with just pseudo. Could anyone explain how to extract pseudo from other stuff? Thanks in advance!

User avatar
Enigma
Site Admin
Posts: 3115
Joined: Thu Jun 01, 2017 7:35 am
Location: The Interweb
Contact:

Re: Shake and Bake method

Post by Enigma » Thu Nov 04, 2021 3:33 pm

I've seen that user name before...... I'll think for a while and see if anything comes to mind.
:weed: [IP: logged]

Post Reply