- Remove plastic trim behind door handle, and light in door
- Remove two screws hidden behind previously mentioned trim
- Pull the door panel off CAREFULLY as the door tweeters have to be removed separately
- If driver's door remove door module (10mm socket)
- Remove plastic sheeting
- IDEALLY you'll be able to have the glass all the way up to remove the retaining clip bolts (10mm socket)
- Carefully remove glass
- Unbolt regulator (10mm socket)
- Swap window motor onto new regulator (10mm socket)
- Assemble in reverse order
2000-2005 Buick Lesabre Window Regulator
2000-2005 Buick Lesabre Window Regulator
Just had to put on of these in because the wire came out of mine and broke a bunch of shit. It's really not hard either you just:
Tell your friends about New Totse. Can't get murdered by police on the internet