Qudro 600 Overclocking
Qudro 600 Overclocking
So I've noticed a strange issue while overclocking. If you raise the CPU clock to anything at all above 880mhz my desktop resets every few seconds and defaults my cursor to the bottom right corner. It's like the card flips out and doesn't know what to do, which is probably why all the "guides" I read only mention bringing it up to that range. The only other annoyance is that I couldn't get the settings to automatically apply every time I reboot.
[IP: logged]
- murderman143
- Registered
- Posts: 146
- Joined: Wed Jun 07, 2017 11:33 am
Re: Qudro 600 Overclocking
wait cpu overclock does this? if gpu that your gpu driver crashing,, your gunna need to raise the voltage limit, power limit, and maybe change your drivers. maybe lock your voltage to your core clock and or change the curve,, what you using to over clock?
- murderman143
- Registered
- Posts: 146
- Joined: Wed Jun 07, 2017 11:33 am
Re: Qudro 600 Overclocking
wait cpu overclock does this? if gpu that your gpu driver crashing,, your gunna need to raise the voltage limit, power limit, and maybe change your drivers. maybe lock your voltage to your core clock and or change the curve,, what you using to over clock?
Re: Qudro 600 Overclocking
For no explicable reason I'm able to rock it out at 1010mhz 1080i. Shit's not even getting warm, it's actually running COOLER than usual.
[IP: logged]
- murderman143
- Registered
- Posts: 146
- Joined: Wed Jun 07, 2017 11:33 am
Re: Qudro 600 Overclocking
prolly enabled some type of gpu boost by, setting the clock and being not voltage temp or power limited . its all about that voltage frequency curve.