How to make plastic explosive from bleach
How to make plastic explosive from bleach
Potassium chlorate is an extremely volatile explosive compound, and has been used in the past as the main explosive filler in grenades, land mines, and mortar rounds by such countries as France and Germany. Common household bleach contains a small amount of potassium chlorate, which can be extracted by the procedure that follows.
First off, you must obtain:
1.A heat source (hot plate, stove, etc.)
2.A hydrometer, or battery hydrometer
3.A large Pyrex, or enameled steel container (to weigh chemicals) 4.Potassium chloride(sold as a salt substitute at health and nutrition stores)
Take one gallon of bleach, place it in the container, and begin heating it. While this solution heats, weigh out 63 grams of potassium chloride and add this to the bleach being heated. Constantly check the solution being heated with the hydrometer, and boil until you get a reading of 1.3. If using a battery hydrometer, boil until you read a FULL charge.
Take the solution and allow it to cool in a refrigerator until it is between room temperature and 0øC. Filter out the crystals that have formed and save them. Boil this solution again and cool as before. Filter and save the crystals.
Take the crystals that have been saved, and mix them with distilled water in the following proportions: 56 grams per 100 milliliters distilled water. Heat this solution until it boils and allow to cool. Filter the solution and save the crystals that form upon cooling. This process of purification is called "fractional crystallization". These crystals should be relatively pure potassium chlorate.
Powder these to the consistency of face powder, and heat gently to drive off all moisture.
Now, melt five parts Vaseline with five parts wax. Dissolve this in white gasoline (camp stove gasoline), and pour this liquid on 90 parts potassium chlorate (the powdered crystals from above) into a plastic bowl. Knead this liquid into the potassium chlorate until intimately mixed. Allow all gasoline to evaporate.
Finally, place this explosive into a cool, dry place. Avoid friction, sulfur, sulfides, and phosphorous compounds. This explosive is best molded to the desired shape and density of 1.3 grams in a cube and dipped in wax until water proof. These block type charges guarantee the highest detonation velocity. Also, a blasting cap of at least a 3 grade must be used.
The presence of the afore mentioned compounds (sulfur, sulfides, etc.) results in mixtures that are or can become highly sensitive and will possibly decompose explosively while in storage. You should never store homemade explosives, and you must use EXTREME caution at all times while performing the processes in this
This is an excerpt from the REVISED version of the anarchist cookbook, be careful with it
First off, you must obtain:
1.A heat source (hot plate, stove, etc.)
2.A hydrometer, or battery hydrometer
3.A large Pyrex, or enameled steel container (to weigh chemicals) 4.Potassium chloride(sold as a salt substitute at health and nutrition stores)
Take one gallon of bleach, place it in the container, and begin heating it. While this solution heats, weigh out 63 grams of potassium chloride and add this to the bleach being heated. Constantly check the solution being heated with the hydrometer, and boil until you get a reading of 1.3. If using a battery hydrometer, boil until you read a FULL charge.
Take the solution and allow it to cool in a refrigerator until it is between room temperature and 0øC. Filter out the crystals that have formed and save them. Boil this solution again and cool as before. Filter and save the crystals.
Take the crystals that have been saved, and mix them with distilled water in the following proportions: 56 grams per 100 milliliters distilled water. Heat this solution until it boils and allow to cool. Filter the solution and save the crystals that form upon cooling. This process of purification is called "fractional crystallization". These crystals should be relatively pure potassium chlorate.
Powder these to the consistency of face powder, and heat gently to drive off all moisture.
Now, melt five parts Vaseline with five parts wax. Dissolve this in white gasoline (camp stove gasoline), and pour this liquid on 90 parts potassium chlorate (the powdered crystals from above) into a plastic bowl. Knead this liquid into the potassium chlorate until intimately mixed. Allow all gasoline to evaporate.
Finally, place this explosive into a cool, dry place. Avoid friction, sulfur, sulfides, and phosphorous compounds. This explosive is best molded to the desired shape and density of 1.3 grams in a cube and dipped in wax until water proof. These block type charges guarantee the highest detonation velocity. Also, a blasting cap of at least a 3 grade must be used.
The presence of the afore mentioned compounds (sulfur, sulfides, etc.) results in mixtures that are or can become highly sensitive and will possibly decompose explosively while in storage. You should never store homemade explosives, and you must use EXTREME caution at all times while performing the processes in this
This is an excerpt from the REVISED version of the anarchist cookbook, be careful with it
Re: How to make plastic explosive from bleach
I'd like to see what it revised. the AC is almost 100% bullshit.
Re: How to make plastic explosive from bleach
Isn't there a revision in the archive somewhere? Like, super wrong and potentially deadly? lol
![Weed :weed:](./images/smilies/weed.gif)
Re: How to make plastic explosive from bleach
Most of the AC was mostly wrong. I don't know enough about chemistry to even try this.
Re: How to make plastic explosive from bleach
If I recall though, that's part of the reason it could remain available after 9/11
![Weed :weed:](./images/smilies/weed.gif)
Re: How to make plastic explosive from bleach
A little easier project would be good old fashioned gun powder.
Easy making potassium nitrate:
Then the recipe for gunpowder. This dude is a bit of a wank, but the chem is solid as far as I can tell.
Easy making potassium nitrate:
Then the recipe for gunpowder. This dude is a bit of a wank, but the chem is solid as far as I can tell.
Re: How to make plastic explosive from bleach
Obviously this is all for informational purposes anyway and nobody should actually do this.
![Weed :weed:](./images/smilies/weed.gif)
-
- Registered
- Posts: 70
- Joined: Fri May 22, 2020 10:21 am
Re: How to make plastic explosive from bleach
Heating bleach is a very bad idea lol the vapors can be potentially fatal upon inhalation.
Stay safe out there, stranger.
![Sun :sun:](./images/smilies/sun.gif)
Re: How to make plastic explosive from bleach
So you're saying don't fill a coffee pot with bleach and let it sit on a warmer in a crowded office? That it might kill a few people?
![Weed :weed:](./images/smilies/weed.gif)
-
- Registered
- Posts: 70
- Joined: Fri May 22, 2020 10:21 am
Re: How to make plastic explosive from bleach
Yessir! Especially in an office with poor ventilation
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Stay safe out there, stranger.
![Sun :sun:](./images/smilies/sun.gif)
Re: How to make plastic explosive from bleach
Okay, I'll make sure I don't accidently do any of that in addition to accidently disabling the ventilation system and accidently spilling 2 stage epoxy on all the door latches
![Weed :weed:](./images/smilies/weed.gif)
-
- Registered
- Posts: 70
- Joined: Fri May 22, 2020 10:21 am
Re: How to make plastic explosive from bleach
Glad you're being safe! As long as there is a window that can open, they'll be safeEnigma wrote: ↑Fri Apr 29, 2022 10:29 amOkay, I'll make sure I don't accidently do any of that in addition to accidently disabling the ventilation system and accidently spilling 2 stage epoxy on all the door latches
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Stay safe out there, stranger.
![Sun :sun:](./images/smilies/sun.gif)
Re: How to make plastic explosive from bleach
Thanks for reminding me! I almost accidently nailed all the windows shut too
![Weed :weed:](./images/smilies/weed.gif)
-
- Registered
- Posts: 70
- Joined: Fri May 22, 2020 10:21 am