|
Interfacing a PK- 232 to an Alinco ALR206T mike cir
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
ALR206T
PK-232 TO ALINCO ALR206T MIKE CIRCUIT
/-<- .1UF CAPACITOR
(AUDIO) WHITE WIRE ----------][--------
---- CONNECT TO PIN 1 ON
RED WIRE -----/\/\/\/-------- ALR 206T
(P.T.T.) \-<- 33K OHM RESISTOR
(GND)
BROWN AND SHIELD WIRE------CONNECT TO PIN 7 ON ALR 206T
WHITE WIRE = AFSK AUDIO OUT
RED WIRE = PTT
BROWN WIRE = GROUND
SHEILD = GROUND
CAPACITOR = .1 UF @ 25WVDC
RESISTOR = 33K OHM @ 1/8 WATT
A SIMILAR CIRCUIT MAY WORK FOR OTHERS THAT DO NOT HAVE A SEPARATE PTT LINE
RELAYED BY...N0KGX...GENE
|
|