|
FORMATTED FOR COLUMNS
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
FORMATTED FOR 80 COLUMNS
MAKING AN FM MONITORING DEVICE
CHEAP, SMALL, AND INTERESTING!
Written by: T.M.M.
Well, there are many files on "bugs", but most of them rely on
complicated equipment. The bug described in this file is simple to install,
and to use. It uses FM freqencies, tunable on your radio, and only draws power
from the batteries when the phone is of the hook.
SUPPLIES:
A "Mr. Microphone" type FM wireless mike w/ batteries
(Radio Shack # 60-2109, 6 bucks I think)
The Phone to Be Monitored
(Preferably a standard desk or wall phone, others are more
complicated to do)
The first step is to tune the mic to the desired frequency. It is best to
tune to the ends of the band (somewhere around 88 or 108 mhz) When it is tuned,
remove the batteries, and take it apart. There should be a small PC board with
wires running to the battery terminals, and two running to the mic. Then cut
the wires on the mic as close to the mic element as you can (to make use of the
most wire). Then take the PC board assembly out of the case.
Then remove the cover of the phone exposing the wires, ringer etc. What
you need to do is trace the the wires coming in from the handset. If you don't
know what they are, unscrew the cover on the earpiece, and lift up speaker.
Look at the wires, on most phones, they are white and an olive green. Find
where the handset cord comes into the phone and trace the wires to the big
block near the center of the phone. You then connect the mic wires that you cut
to the two screws that have the speaker cords hooked up to them.
You then have to trace the switchhook wires to the block. You connect one
side of the batteries to one of the switchhook wires. Run the other battery
wire to the mic. Then connect the two remaining wires together, and presto, the
conversation is sent to your radio or walkman!
Have PHUN, and don't get caught... I think it's legal if one of the people in
the conversation knows about the monitoring, but who gives a shit!
|
|
