|
Yaesu FT- 209 mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
FT209
de OE6RCD @ OE6UBG
FT 209 R /FT 209 RH Modification
It is possible to activate any 10 MHz segment between 130 and 160 MHz on the
FT 209 Handy from Yaesu. First you have to solder in the bridge 7 on the
control unit board ( pcb with the keypad ). Now after a reset the display
shows you "0000" with the first digt flashing and you have to enter
the receiving low, receiving high, transmitting low and transmitting high
frequency (only the first 4 digits !). For example :
If you wish a receiving segment from 142.500 to 151.800 and a transmitting
segment from 144.000 to 146.000 MHz you must enter the follwing after the
reset :
1 4 2 5 D
1 5 1 8 D
1 4 4 0 D
1 4 6 0 D
Finaly you must programm the repeater shift. The shift is n o t set to
600 kHz. Enter 0 6 0 0 F shift. That's all !
The PLL locks only between 138 - 152 MHz successfully and transmitter
works only between 140 - 149 MHz. If you want to use other frequencies
you must realigment the rig.
Best 73's de Roland, OE6RCD @ OE6UBG or @ DK0MAV
|
|
