|
Yaesu FT- 767 mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
ft767.4
Some time ago, I read some requirement for help in order to interface
a YEASU CAT SYSTEM to a Computer.
Hereafter, what I'have done to drive an FT-767 with the RS232C of a
computer.
DB25S (Computer side) DIN6 (TRCVR side)
/----------------- 3 SI
2 TD -----/////-------
10K \ NPN 2N2484
V ou equi.
___
7 GND ------KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK:95
3 RD --------------- >-----//////------ 2 SO
4 RTS _ / 10K
5 CTS _ V
NPN 2N2484
/ ___ ou equi.
/
/ 10K
/
6 DSR _ 8 CD ________ 20 DTR _
This is wired directly on the DB25S connectocTmto suit your needs.
Remember to switch on the CAT first, and to switch it off at the end of
your instructions, if you have to operate manualy the rig later on.
Good luck. JP
|
|