|
Modification for Icom 02at
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC02AT
From : KC4MCQ @ N8GTC.IN.USA.NA
To : MODS @ ALLUS
Date : 900610/1416
MsgID : BF 3895@N8GTC, 697@KJ6YT $25840_K6IYK
Subject : ICOM AUDIO MOD
Via : AA6QD!K6TZ!K6IYK!KB6JES!KB6GVT!W6TJ!AA6QN!N8GTC
===== AUDIO MODIFICATION FOR ICOM IC02 AND IC04 RADIOS =====
------------------------------------------------------------------------------
This audio mod works on the 02 and 04AT. It increases the level of audio, as
well as rolling off some of the lows. Sounds real nice. It involves the
circuit around Q105.
1. Replace C119 with a .01 uF cap (disc ceramic is fine).
2. Parallel R131 with a 1 uF cap (use a tantalum cap).
3. Parallel R132 with a .01 uF cap (disc ceramic is fine).
This is not the same mod as the one International Radio is advertising, which
involves changing C117.
I tried an AB-1 Audio Blaster from Engineering Consulting, and was very
unhappy with the results. I am very pleased with the audio given by this mod
(much cheaper too!).
----------------------------------
CONTINUED IN FILE IC02AT.9
|
|
