|
Kenwood TS- 440 Computer Interfacing
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC10.4
Lock Knob
_________
LKn;
The Manual Frequency Control Functions Will be Disabled
Where n = 0 for Lock OFF
1 for Lock ON
Memory Channel Select
_____________________
MCxmm;
The Memory Channel Defined Will be Selected
Where: x = Don't Care (Use "0" or Space)
mm = Memory Channel No. (00 thru 99)
Mode Select
___________
MDn;
The Mode Defined Will Be Selected
Where: n = 1 for LSB
2 for USB
3 for CW
4 for FM
5 for AM
6 for FSK
Memory Read
____________
MRnxrr;
The Memory Channel Defined Will be Read
Where: n = 0 for RX VFO
1 FOR TX VFO (Split Channels Only)
x = Don't Care (Use "0" or Space)
rr = Memory Channel No. (00 thru 99)
The Memory Information will be sent in the Form :
MRn rrggmmmkkkhhhdz ;
Where: n = 0 for RX VFO
1 FOR TX VFO (Split Channels Only)
rr = Memory Channel No. (00 thru 99)
gg~~hhh = Value as defined in FA Command
d = Value as defined in MD Command
z = "0" (Not Used in TS-440)
(Note: Four trailing Spaces)
CONT IN IC10.5
|
|