|
Icom 2400A mini repeater function
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
ic2400a
ICOM 2400A MINI REPEATER FUNCTION
1. CUT D9 (MAY NOT BE REQUIRED NOT IN ALL RADIOS)
2. TURN OFF POWER
3. PUSH AND HOLD MONI, MHZ, SET BUTTONS & MIC DOWN BUTTON
4. TURN ON POWER
5. RELEASE ALL BUTTONS
ICOM 2400A REPEATER FUNCTION CANCELL
1. PUSH AND HOLD SET BUTTON
2. THEN DEPRESS MHZ
NOTES:
IF YOUR RIG HAS D9, THE DIODE ABOVE IT WILL EXPAND THE 440
BAND RECIVE IF IT IS CUT ALSO.
TO FIND D9, LOOK AT THE BACK OF THE FACE PLATE INSIDE RADIO
ON LEFT HAND SIDE, YOU SHOULD SEE A VERTICAL LINE OF 7
DIODES, D9 FOR REPEATER IS 2ND FROM THE BOTTOM AND 440
EXPANDED RECIEVE IS THE 3RD ONE FROM THE BOTTOM. THIS IS
KINDA HARD TO EXPLAIN, AS OF THIS WRITING THERE ARE NO
SERVICE MANUALS AVAILABLE, BUT ICOM WILL SEND YOU THE MOD
WITH A PHOTOCOPY OF THE MOD IF REQUESTED.
CALL GARY FIBER KF7XV, ICOM TECH. CUSTOMER SERVICE REP. AT
PHONE # 206-454-7619, OR FAX AT 206-454-1509.
*END*
|
|