|
de DG FZ @ DB EAM
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
de DG8FZ @ DB0EAM
How to make the VOX of an IC-271,471,1271 usable for FM :
1'st type of 'main-board' :
The only thing to be done is to add a diode such as 1n4148 or bax13 on the
MAIN board on the position D74
When D74 is inserted ... the vox works in FM also.
The diode is on the shematic diagram of the Main board but
is not mounted on the pcb in the factory.
73's de stefaan
ON4BY @ ON4HU
16/03/1990 18.31 h
2'nd type : (On this board a D74 is present (near PA- and RF-YGR- Unit))
(It might be not present in the plans !)
Disconnect the cathode of D69 from it's old postition.
It's new position is the cathode of D50 or D51
name ! position on main board ! (old) function !
D69 ! near 'CW-DELAY'. ! 'FM -VOX-OFF' ! FM 8V
D50 ! near 'RF-YGR-Unit' ! 'USB-VOX-ON' ! USB8V
D51 ! near 'RF-YGR-Unit' ! 'LSB-VOX-ON' ! LSB8V
73's de karl
DG8FZ @ DB0SAO
20/03/1990 16.52 h
Downloaded From P-80 International Information Systems 304-744-2253
|
|
