|
Icom IC3210 mod
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC3210
Model: IC-3210
Division: Amateur
Note: This service bulletin is meant for technical per-
sonnel with experience working on solid state com-
munications equipment. Damage caused by im-
properly installing this modification may cause
ICOM to charge for subsequent repairs to the
product. ICOM does not warrant this modification.
Bulletin #: 28Oct86-027
Date: October 26, 1986
Subject: To prevent spurious signals on TX when the PA
module was changed form a Toshiba part to a Mit-
subishi part
Procedure
1. Replace the following parts on the main board:
Current Component New
Part Identifier Part
470K R40 680K
560K R41 1Meg
4.2K R42 4.7K RH0521CS3J04A
47K R44 100K RH0651C15J1UA
Bulletin #: 13889-021
Date: May 1, 1989
Subject: Some IC-3210s exhibit poor sensitivity in the UHF
band
Procedure
Write to ICOM's Customer Service department for a copy of
this service bulletin.
|
|
