|
Modification for Icom 32at
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC32AT.13
Icom Service Bulletin #13889-005
The IC-32AT has the capability of being used as a cross-band repeater.
This function is not enabled as the unit is shipped from the factory.
To enable this function perform the following steps:
1- Cut D912 on LOGIC UNIT. (see above figure)
2- Push and hold the (FUNCTION) switch.
3- Push the (C) key.
4- Push the (6) key.
5- Push the (D) key.
6- Release the (FUNCTION) switch.
To cancel "MINI REPEATER" perform the following steps:
1- Push and hold the (FUNCTION) switch.
2- Push the (D) key.
3- Push the (C) key.
4- Release the (FUNCTION) switch.
Downloaded From P-80 International Information Systems 304-744-2253
|
|