|
Icom IC- 761 mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC761.1
IC-761 ACTIVATE TUNER WHEN IN GENERAL COVERAGE MODE
Remove the top cover of the IC-761 and locate the tuner band switch unit
PC Board which is the 2nd small PC board located behind the antenna tuner
preset unit. On the board, locate J 7 and at that location, you will note
a three (3) pin molex plug with a black, brown, and red wire connected to
it. Either unplug, remove, or clip the center brown wire coming from the
plug. Carefully unplugging the wire and placing heat shrink tubing over
the end works very well. This enables the tuner to be activated on GENERAL
as well as the ham bands.
RELAYED BY...N0KGX...GENE
|
|