|
Icom IC- 761: wider SSB without mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC761
WIDER SSB BANDWITH ON THE ICOM IC-761 WITHOUT ANY
MODIFICATIONS
When in SSB mode and the filter switch is in the "out
position", your normal bandwidth is 2.6kHz. When the filer
switch is in the "in position", your normal bandwidth is
2.4kHz. I have noticed there is a 3rd SSB bandwidth for
receiving in the SSB mode. Leave the filter switch in the
out position and place the IF shift button in the "in
position" for IF shift, and now the bandwidth is 3 to 3.2kHz
wide. When using the filter switch only to select the
advertised wide and narrow position for SSB bandwidth, you
receive and transmit at those bandwidths and are using both
the 9MHz and 455MHz filters; however, when using the above
method as stated for the wider selectivity, it appears you
are receiving through the wide ceramic 455MHz filter only,
and bypassing the 9MHz filter. So there are three positions,
not two.
MODE 9MHZ 455 BANDWIDTH
SSB FL-80 CFJ-455K5 2.6
SSB FL-80 FJ-44A 2.4
SSB By Passed CFJ-455K5 Approx 3.0
RELAYED BY...N0KGX...GENE
|
|
