|
Out of Band Receive Mods for the IC901
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC901
OUT OF BAND RECEIVE MODS
FOR THE IC-901
To modify your IC-901 for out of band receive on each of the bands remove
the following diodes in the control head.
28 MHz D24
50 MHz D28
220 MHz D19
430 MHz D25
TO ENABLE CROSS BAND REPEAT
Flip S1 on the logic board (located in main unit at the very front)
Dial up the frequency you need on the main and sub band
Turn off the IC-901
Push and hold "Check" and "Lock"
Turn the power to the IC-901 on
To disable the cross band repeat function depress the "Lock" button
|
|