|
Icom IC- u2AT mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
ICU2AT.4
Model: IC Micro 2AT
Division: Amateur
Note: This service bulletin is meant for technical per-
sonnel with experience working on solid state com-
munications equipment. Damage caused by im-
properly installing this modification may cause
ICOM to charge for subsequent repairs to the
product. ICOM does not warrant this modification.
Bulletin #: 8988-002
Date: March 29, 1988
Subject: If transmit RF indicator is not reading properly
Procedure
1. Disassemble the radio to gain access to the RF Board.
2. Replace the following parts on the RF Board:
Reference Original New ICOM
Designator Value Value P/N
Q309 2SA 1162 1SS 196 912-00965
D309 1SS 211 2.2Meg 1/8W
R345 Remove this part
C349 Remove this part
3. Reassemble the radio.
|
|