|
Equipment Modification: Regency MX7000/MX5000 Stop
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
*****************************************************************************
Subject: Regency MX7000/MX5000 stop search function
here is a handy way to get the scanner to automatically
stop searching when it hits an active frequency and remain there until
it is re-started manually.
With the scanner stopped on any channel using the MANUAL key, press
CLOCK SET followed by ENTER. Now enter at least one numeric digit, but do
not press ENTER after keying in the digit(s). Instead, press SCAN.
If you shut the scanner off, you will notice that the clock is not
running. The digit(s) that you entered is displayed. Now use the
search feature as you normally would. When it hears a signal, it will
stop and remain on that frequency. After the signal ceases, pressing
any key that would normally give you an "error beep" (such as the ENTER
key) will restart the search from where it left off. If you do not wish
to wait for the signal to go away before restarting the search, press
the UP key until it is gone, then press a key to produce the "error
beep."
To re-start the clock after you're through using the search-hold feature,
just use the normal clock-set method. Incidentally, the priority feature
will not work if the clock is not running.
****************************************************************************
Downloaded From P-80 International Information Systems 304-744-2253
|
|
