|
Mods for PRO- 2022
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
PRO-2022
DESK-TOP PROGRAMMABLE SCANNER
How to modify my scanner to receive CMT?
For months now I have been asking friends,reading books and checking various
bulletin boards on how to do just that...but to no avail,until today.
So here it is..
step 1) unplug the unit from the wall [safety first].
step 2) disconnect your antenna [that's right].
step 3) unscrew the two top screws on back and remove casing [top only].
step 4) locate diodes D43 and D44 [behind squelch control].
step 5) if u r nut sure wat 2 du den dont.
step 6) snip diode D44 and push the two cut ends apart [eh].
step 7) close the unit,plug in,switch on and push the reset button once.
You now have a continuous frequency sweep of 806MHz-960MHz CMT included.
CAUTION:- MODIFYING OR TAMPERING WITH THE SCANNER'S INTERNAL COMPONENTS CAN
CAUSE A MALFUNCTION AND MIGHT INVALIDATE THE SCANNER'S WARRANTY.
ENJOY, THE ENGLISHMAN
73040,2130
|
|