|
Kenwood TH- 25AT mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
TH25AT.3
TH-25AT MARS/CAP MODIFICATION
The following modifications will allow the TH-25AT to transmit from
141.000 to 162.995 MHz. Specifications are guaranteed for the Amateur
band only. The transceiver may require realignment of the PLL
circuits.
1. Disconnect battery pack and antenna.
2. Remove the volume, squelch and tuning control knobs by pulling
them straight up from the top panel.
3. Using a 7mm spanner wrench, remove the nut from the volume
control and the nut from the tuning control.
4. Remove one screw from the back of the radio, by the PTT switch.
5. Remove one screw near the speaker jack.
6. Remove two screws from the battery terminal plate:
--- remove ----
/ \
+---------------------+
[ 0 0 [
[ [
[ +------+ [
[ [ [ [
[ +------+ [
[ [
[ O O [
+---------------------+
CONTINUED IN FILE TH25AT.9
|
|