|
TH - A MARS/CAP MODIFICATIONS
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
TH75-A MARS/CAP MODIFICATIONS
This modification will allow the TH-75A to transmit from 142 to 152 MHz and
420 to 450 MHz. Specifications are guaranteed for the Amateur bands only.
Though the transceiver will display 136 to 174 MHz and 335 to 512 MHz, the
PLL circuit may not lock through the entire range.
MODIFICATION PROCEDURE :
1. Disconnect the battery and antenna.
2. Remove the three case screws and two battery plate screws.
3. Lift the front panel from the body of the transceiver, but do not
disconnect the two flex cables.
4. Cut the green jumper wire (W1) that is located to the left side of the
CPU in the front panel assembly.
5. Assemble the transceiver by reversing steps 1 - 3.
6. Reset the CPU by holding the M key as the power is turned on.
Downloaded From P-80 International Information Systems 304-744-2253
|
|
