Information on E.L.F. Waves

Information on E.L.F. Waves

Date: Fri, 24 Feb 1995 11:49:52 -0600 (CST) Ok folks .. IN CASE <grin> there are any debunker types out here from let's say various politically approved institutions <howdy! ;^}> .... the following comes from the Web at URL http://info.arl.army.mil/WTD/wtd.html and anyone can access it ... comments in [..] are mine Len ps: Yep .. more support for ELF as a weapon! * * * World Wide Web Weapons Technology Directorate Directorate Executive:...

How to Make a Taser

by Zilith the Insane

To make an extremly cheap taser all you need to do is take apart a disposable camera and keep the green card. then put a wire on the little metal part that sticks out next to the capacitor (the black thing), and put another wire somewere else (just about anywere will do as long as it touches metal). also the two wires that connect capacitor to the rest of the camera are quite good. To charge the taser just press the button that charges...

How to Make a Silencer

by Brian Douglas Kendall

A suppressor works in the same way as a car muffler. The muffler consists of chambers for the compression to be dispersed and the sound to be redirected or absorbed. Heat is also reduced throughout the muffler system. A suppressor works on the same principle. There are generally three sections to a firearm suppressor; The first stage ususally consists of something that will absorb and dissipate heat rapidly. It also allows...

How to Make a Crossbow

by Splint

How to Make a Crossbow

Supplies:

1 Piece of wood to make the stock

( a 2x4 will not be big enough, 2x6 should work, if you can find one.)

1 Leaf spring from car

(only one section is needed)

1 Cable to use as spring

( The break cable from the same car you got the spring out of would be perfect. If not bow string will work also.)

Hammer and nails...

How to Make Poisonous Gas

HOW 2 MAKE POISONOUS GAS

(with household materials)

It is simple enough. This is an easy way to make a poisonous gas that can kill, or at least severely injure when made. Here is what you do. Take some bleach & ammonia, and mix them together in a bottle. Shake it up a bit. DON'T BREATH IT IN. It will get warm, maybe even hot. That liquid emits a poisonous gas. Wee! Be careful with this stuff. And don't breathe it in. Thus is...

How to Make A Stungun

by Grean Dean

How to Make A Stungun

by The Green Dean

So you want to ZaaaaaaP the shit out of someone. Well I have the thing just for you. It delivers a nice Shock of 75,000 Volts and causes muscle spasms. A word of caution don't try this on your self (Dumb Shit). Well you be need'n to go down to your local RADIO-SHACK. Yes that is what I said RADIO-SHACK where they sell shitty computers. Just for a joke tell'em you want to buy...

How To Make The Best Spudgun

What you will need:

- 1 BBQ igniter (button with small cables)
- 1 PVC or ABS pipe 18" long X 4" diameter.
- 1 PVC or ABS pipe 5 ft long X 1,5" diameter.
- 1 PVC or ABS screwable cap for the 4" pipe.
- 1 PVC or ABS 4"-1,5" adapter.
- PVC or ABS glue
- If you use PVC, clean all pieces before glue it;
use PVC cleaner.

Assembly:

1. Glue the 4"...

How To Make The Best Spudgun

What you will need:

• 1 BBQ igniter (button with small cables)
• 1 PVC or ABS pipe 18" long X 4" diameter.
• 1 PVC or ABS pipe 5 ft long X 1,5" diameter.
• 1 PVC or ABS screwable cap for the 4" pipe.
• 1 PVC or ABS 4"-1,5" adapter.
• PVC or ABS glue
• If you use PVC, clean all pieces before glue it -- use PVC cleaner.

Assembly:

1. Glue the 4" diameter pipe into the female plug of the 4"-1,5"

...

How To Contact The Militia

How To Contact The Militia

In light of some moves made by our elected representitives and their bureaucratic underlings that could be considered totalitarian, people across the country have been forming citizen's militias. The concept of a citizen militia is well grounded in our country's law; which considers every citizen above the age of 18 part of it, and makes a distinction betwen it, calling us the unorganized militia, and the organized...

Home-Made Armor

by Necross Sinister

HOME-MADE ARMOR

An article on improvised protection

by Necross Sinister

Something that happened to a friend of mine forced me to write this article and submit it for this issue. Namely, he and his girlfriend were assaulted by a group of skinheads. Most attacks by gangs or groups involve hands, feet, clubs and knives. With modern materials you reduce the effects of these attacks allowing you to escape...