|
False identification (Fake ID)
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
False Identification
By
Forest Ranger
The objective of this file is to teach one to change his or her
current driver's license to make one 21, without taking apart the driver's
license itself. This will be taught to you in a quick, inexpensive, easy
to understand process. The materials used are laminated sheets (easily
obtainable from a school supply store for around a dollar to two dollars
for a number of sheets), pair of good scissors, and a copy machine.
The first step in the process calls for the copy machine (a copy
machine at the supermarket works good). Make two copies of your driver's
license. Take one copy and search for a digit on one of the copies that
will change the current year on your license to one that will change your
age (21). Once you have found the digit on one copy, cut it out so just
the digit is there (a square segment with a little trim around the edges is
a good cut). Then take the other copy and cut out the current last digit
of the year you were born in basically the same shape as the last. Put the
cut out digit under the copy that you had cut out your current digit of the
year you were born. Now having a little trim around the cut out digit from
the first copy will assist you when lining it up under the second copy when
you put it in the copy machine. Now that you have the new digit from the
first copy sitting underneath but showing on the second copy, place it in
the copy machine and make a copy so that you will have an original of the
new base part of the license.
Now since most copy machines are black and white you will have to cut
away the states license on the top of the license (e.g. Illinois License).
Now place the new base of the license with the cut away license name over
the old base of the current license. The new base might not match up like
it should but line it up as a good as possible. Now place a piece of the
laminated sheet cut out to configure the license on top of the new base.
Cut away any overlaps of laminated paper and iron over the license with
Mom's good old iron.
Notes: This process has been proved to work. If you are the type of
person that looks very young, then do not bother to make an ID. You will
just get caught and get into a lot of trouble. Also, be very careful at
well known bars and over 21 hang out spots. The employees at these places
tend to flash a flashlight underneath the card to see if it is transparent.
It is supposed to be. With this process it is a little hard to see through
the ID so be careful with it if you do go to a place such as this. If you
are pulled over by the police then take a corner of the license and rip. It
will not affect your original license though it maybe a little sticky but,
that should not be to big of a problem. If any bubbling occurs just iron
over it and let it sit for a while.
The Wanderjahr
|
|
