|
How to Remove Inktags
by divinesuffering719
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
You can use a lighter to remove inktags, if there is no way of getting the merchandise out of the store without getting caught, but using a lighter to melt the plastic would smell really, really bad and most likely attract attention. What I recommend, is getting the stuff home. Heat a knife up really hot on the stove, then cut through about 1/4 an inch from the point of the tag. You may have to reheat the knife. Depending on how you cut it, you may have to get past a little plastic dome inside with a spring and a cylinder metal piece. Just melt the plastic dome (or cut through it) and pop the spring out carefully along with the metal. Then there's the 4 little balls inside that keep the inktag together. You have to remove the balls before pulling the tag apart or it'll blow up. Just pop them out with a knife. I've only seen 2 kinds of inktags and they are pretty much the same. I'm almost positive that they don't set off door alarms, so I suggest you remove these at home not at the store. You can also freeze the tag and pop it off with a screwdriver. Have fun...I know I do. :)
|
|
